CLI Guide

# cfgCurrentLinkLocalAddress=fe80::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address1=2009:123::e48f:9dd8:6f51:a669/64
# cfgCurrentIPv6Address2=fd88:1::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Address3=fd88:2::21e:4fff:fe1f:5371/64
# cfgCurrentIPv6Gateway=fe80::21c:23ff:fe77:6215
# cfgCurrentIPv6DNSServersFromDHCP6=1
# cfgCurrentIPv6DNSServer1=2009:123::1
# cfgCurrentIPv6DNSServer2=::
cfgNetTuning
This group enables users to congure the advanced network interface parameters. When congured, the updated settings may take up to
a minute to become active.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modication of the properties in this
group can result in your RAC NIC become inoperable.
The following sections provide information about the objects in the cfgNetTuning group.
cfgNetTuningNicSpeed (Read or Write)
Description
Species the speed for the CMC NIC. This property is used only if cfgNetTuningNicAutoNeg is set to 0.
Legal Values
10, 100, or 1000
Default
100
cfgNetTuningNicAutoneg (Read or Write)
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over other
values set in this group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNicFullDuplex (Read or Write)
Description
Species the duplex setting for the NIC. This property is used only if thecfgNetTuningNicAutoNeg is set to 0
(disabled).
Legal Values
• 0 (Half Duplex)
• 1 (Full Duplex)
148 CMC Property Database Group and Object Descriptions