CLI Guide

Timestamp = 2014-10-18 15:48:10
Message Arg 1 = 14503
Message Arg 2 = 48186
Message = Successfully closed Session process: pid=14503
sid=4818
getractime
Description Displays the current CMC time.
Synopsis
● racadm getractime [-d]
● racadm getractime [-d] [-z]
● racadm getractime [-n]
Input
● -d — Displays the time in the format, YYYYMMDDhhmmss.
● -z — Displays timezone.
● -n — Displays NTP peer information.
NOTE: If the options are not provided, then the getractime subcommand displays the time in a
common readable format.
Output The current CMC time is displayed.
Example
● racadm getractime
Mon May 13 17:17:12 2013
●
racadm getractime -d
20141126114423
getredundancymode
Description
Displays the redundancy status (Redundant or Non-Redundant) of the CMC.
To run this subcommand, you must have the CMC Login User privilege.
Synopsis
racadm getredundancymode
Input N/A
Example
racadm getredundancymode
Redundant
getsel
Description
Displays all system event log (SEL) entries in CMC.
Synopsis
● racadm getsel [-i] [-m <module>]
● racadm getsel [-s <start>][-c <count>] [-m <module>] [--more]
NOTE: If no arguments are specified, the entire log is displayed.
Input
● —i — Displays the number of entries in the SEL.
● -s — Displays the starting record number.
62 RACADM Subcommand Details