CLI Guide

CMC N/A Present 34:17:EB:E6:E
0:24
N/A Factory
server-1
-A
10 GbE KR Not
Installed
10:98:36:AC:7
0:EB
Not Installed Not
Installed
Server-2 Not
Installed
Not Present Not
Installed
Not Installed Not
Installed
Server-3
-A
Reserved Present
Switch-4 Not
Installed
Not Present Not
Installed
Not Installed Not
Installed
Switch-1 Not
Installed
Not Present Not Installed N/A N/A
NOTE: If the I/O Modules in slots 1 and 2 are absent and the getmacaddress -a and getmacaddress —c all
commands are run, the output is displayed as Not Installed in the following columns:
● <Presence>
● <NIC1 MAC Address>
● <NIC2 MAC Address>
getmodinfo
Description
Displays configuration and status information for all modules or a specified module (server, switch, CMC,
fan unit, power supply unit (PSU), KVM, or I2C cable) in the chassis.
A power state of "Primary" denotes Active CMC.
To run this subcommand, you must have the CMC Login User privilege.
NOTE: The Service tag field is blank for modules that do not have service tag.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
● -m <module> — Specifies the module whose configuration and status information you want to view.
The default command (no options) displays information about all major components in the chassis.
<module> may be any of the following values:
○ server-<n> where n=1–16
○ server-<nx> where n=1–8; x = a, b, c, d
○ switch-<n> where n=1–6
○ cmc-<n> where n=1–2
○ fan-<n> where n=1–9
○ ps-<n> where n=1–6
○ chassis
○ kvm
○ io-cable
○ fpc-cable
● -A — Suppresses headers or labels in the output.
54 RACADM Subcommand Details