Release Notes
Release 5.13
Added a RACADM command to enable or disable CMC failover due to network link loss.
To check CMC changeover state for network failure : racadm cmcchangeover --state
To enable this flag : racadm cmcchangeover -e 1
To reset this flag : racadm cmcchangeover -e 0
Release 5.12
Quick link to the Dell Tech Center page from the CMC web GUI.
Release 5.10
Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.
Capture and replicate chassis configurations through XML based on the Chassis configuration
profile.
Support for blinking server identification LED from Quick Link on the Homepage.
Backup or restore through XML based on the chassis configuration profile.
Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to enable
a quick restore of workload to a spare server.
Populate iDRAC DNS setting from the CMC Quick Deploy page.
Display iDRAC DNS name as the slot name.
Option to view iDRAC LCLog results directly in CMC after applying a Server Configuration Profile.
Support for launching IOA GUI on Homepage, I/O Module overview page.
Support to list IOA Flex modules on IOM properties page and in tooltip.
Release 5.01
CMC Secure IOM mode is implemented in CMC 5.01. Secure IOM provides additional CMC
security in support of MXL IOMs running in UC-APL secured environments.
Fixes
N/A
Release 5.21
N/A
Release 5.20
Fixed an issue causing flash Media Status showing as "Version mismatch" during changeover or
upgrade of the CMC.
Fixed an issue causing the Server Profile page to hang when a profile is applied to multiple
servers.
Fixed an issue limiting the speed of bNDC ports on some blades to 1 Gb after initial chassis turn on
or blade insertion.
Fixed an issue causing the slots 1-4 not initializing iDRAC after initial turn on.
Release 5.12
Fixed an issue with Server/Host operating system (OS) network flap, which occurs occasionally on
Modular platforms for a short duration during CMC initialization.