Users Guide

Viewing WWN/MAC Address Information
You can view the virtual address inventory of Network Adapters for each server slot or all servers in a chassis. The virtual address inventory
includes the following:
• Fabric Conguration
NOTE:
– Fabric A displays the type of the Input/Output fabric installed. If Fabric A is enabled, unpopulated slots display chassis-
assigned MAC addresses for Fabric A.
– iDRAC management controller is not a fabric, but its FlexAddress is considered as a fabric.
– A check mark against the component indicates that the fabric is enabled for FlexAddress or FlexAddressPlus.
• Protocol that is being used on the NIC Adapter port. For example, LAN, iSCSI, FCoE, and so on.
• Fibre Channel World Wide Name (WWN) conguration and Media Access Control (MAC) addresses of a slot in the chassis.
• MAC address assignment type and the current active address type — Server assigned, FlexAddress, or I/O Identity MAC. A black
check mark indicates the active address type, either server-assigned, chassis-assigned, or remote assigned.
• Status of the NIC partitions for devices supporting partitioning.
You can view the WWN/MAC Address inventory using the Web interface or the RACADM CLI. Based on the interface, you can lter the
MAC address and know which WWN/MAC address is in use for that function or partition. If the adapter has NPAR enabled, you can view
which partitions are enabled or disabled.
Using the Web interface, you can view the WWN/MAC Addresses information for specic slots using the FlexAddress page (Click Server
Overview > Slot <x> > Setup > FlexAddress). You can view the WWN/MAC Addresses information for all the slots and server using the
WWN/MAC Summary page (Click Server Overview > Properties > WWN/MAC). From both the pages you can view the WWN/MAC
Addresses information in the basic mode or the advanced mode:
• Basic Mode — In this mode you can view Server Slot, Fabric, Protocol, WWN/MAC addresses, and Partition Status. Only Active MAC
addresses are displayed in WWN/MAC address eld. You can lter using any or all of the elds displayed.
• Advanced Mode — In this mode you can view all the elds displayed in the basic mode and all the MAC types (Server Assigned, Flex
Address, and IO Identity). You can lter using any or all of the elds displayed.
In both the Basic mode and the Advanced mode, the WWN/MAC Addresses information is displayed in a collapsed form. Click the
against a slot or click Expand/Collapse All to view the information for a specic slot or all the slots.
You can also export the WWN/MAC Addresses information for all the servers in the chassis to a local folder.
For information about the elds, see the Online Help.
Viewing Basic WWN/MAC Address Information Using
Web Interface
To view WWN/MAC Address information for each server slot or all servers in a chassis, in the basic mode:
1 Click Server Overview > Properties > WWN/MAC.
The WWN/MAC Summary page displays the WWN/MAC Address Information.
Alternatively, click Server Overview > Slot <x> > Setup > FlexAddress to view the WWN/MAC Address information for a specic
server slot. The FlexAddress page is displayed.
2 In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.
3 Click the against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specic slot or all the slots in
the WWN/MAC Addresses table.
186
Uso de las tarjetas FlexAddress y FlexAddress Plus