Users Guide

Privilege Description
Listed below are the privileges and the actions on the server to which the Server Administrator is entitled.
These rights are applied only when the chassis user does not have the Server Administrative privilege on the
chassis.
Server Conguration Administrator:
• Set IP address
• Set gateway
• Set subnet mask
• Set rst boot device
Congure Users:
• Set iDRAC root password
• iDRAC reset
Server Control Administrator:
• Power on
• Power o
• Power cycle
• Graceful shutdown
• Server Reboot
Test Alert User User can send test alert messages.
Debug Command
Administrator
User can execute system diagnostic commands.
Fabric A Administrator User can set and congure the Fabric A IOM, which resides in either slot A1 or slot A2 of the I/O slots.
Fabric B Administrator User can set and congure the Fabric B IOM, which resides in either slot B1 or slot B2 of the I/O slots.
Fabric C Administrator User can set and congure the Fabric C IOM, which resides in either slot C1 or slot C2 of the I/O slots.
The CMC user groups provide a series of user groups that have pre-assigned user privileges.
NOTE
: If you select Administrator, Power User, or Guest User, and then add or remove a privilege from the pre-dened set, the
CMC Group automatically changes to Custom.
Table 22. : CMC Group Privileges
User Group Privileges Granted
Administrator
• CMC Login User
• Chassis Conguration Administrator
• User Conguration Administrator
• Clear Logs Administrator
• Server Administrator
• Test Alert User
• Debug Command Administrator
• Fabric A Administrator
• Fabric B Administrator
• Fabric C Administrator
Power User
• Login
• Clear Logs Administrator
• Chassis Control Administrator (Power commands)
• Server Administrator
Conguración de cuentas de usuario y privilegios 139