Users Guide

Setting Description
chassis. The specified auto-deployment settings are used
to configure the new iDRAC, which includes the root user
password if Change Root Password is selected.
Server Profile Only— Select this option to apply server
profile assigned when a new server is inserted in the
chassis.
Quick Deploy and Server Profile — Select this option to
first apply the iDRAC network settings, and then to apply
the server profile assigned when a new server is inserted
in the chassis.
Set iDRAC Root Password on Server Insertion Specifies whether a server’s iDRAC root password must be
changed to the value provided in the iDRAC Root Password
field when the server is inserted.
iDRAC Root Password When Set iDRAC Root Password on Server Insertion and
QuickDeploy Enabled options are selected, this password
value is assigned to a server's iDRAC root user password
when the server is inserted into chassis. The password can
have 1 to 20 printable (including spaces) characters.
Confirm iDRAC Root Password Verifies the password entered into the iDRAC Root
Password field.
Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By default, this
option is disabled.
Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default, this option is
enabled.
Enable iDRAC IPMI over LAN Enables or disables the IPMI over LAN channel for each
iDRAC present in the chassis.By default, it is disabled.
Enable iDRAC DHCP Enables or disables DHCP for each iDRAC present in the
chassis. If this option is enabled, the fields QuickDeploy IP,
QuickDeploy Subnet Mask, and QuickDeploy Gateway are
disabled, and cannot be modified since DHCP is used to
automatically assign these settings for each iDRAC. By
default, this option is disabled.
Reserved QuickDeploy IP Addresses Enables you to select the number of static IPv4 addresses
reserved for the iDRACs in the chassis. The IPv4 addresses
starting from Starting iDRAC IPv4 Address (Slot 1) are
considered as reserved and assumed to be unused elsewhere
in the same network. Quick Deploy feature does not work for
servers that are inserted into slots for which there is no
reserved static IPv4 address. The maximum number of static
IP Addresses reserved for:
Qurter-height servers are 32 IP addresses.
Half-height servers are 16 IP addresses.
Full-height servers are 8 IP addresses.
98