Users Guide

Service Tag The factory-assigned service tag.
Part Number The Manufacturer part number.
Firmware Version iKVM firmware version.
Hardware Version iKVM hardware version.
NOTE: This information is dynamically updated
Table 60. Server Status
Item Description
Example: Server 1, Server 2, etc. Name/Location.
No Errors If there are no errors then the message “No Errors” is displayed,
else error messages are listed. Critical errors are listed first,
followed by warnings. For more information see LCD Error
Messages.
Slot Name Chassis slot name. For example, SLOT-01.
NOTE: You can set this table through the CMC CLI or
Web interface.
Name Name of the server, which the user can set through Dell
OpenManage. The name is displayed only if iDRAC has finished
booting, and the server supports this feature, else iDRAC
booting messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware Version Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is no
iDRAC version 1.10.
IP4 <enabled, disabled> Displays the current IPv4 enabled state.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled.
IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays current IPv6-
enabled state.
IP6 Local Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
IP6 Global Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
FlexAddress enabled on Fabrics Only displays if the feature is installed. Lists the fabrics enabled
for this server (that is, A, B, C).
The information in the table is dynamically updated. If the server does not support this feature, then the following information does
not appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Effect.
• Option “Custom” = Allows you to enter a string name for the server.
234