Users Guide

Related links

Viewing Event Logs

Viewing Hardware Logs Using CMC Web Interface

You can view, save, and clear the hardware log. You can sort the log entries based on Severity, Date/Time, or Description by

clicking the column heading. Subsequent clicks on the column headings reverse the sort.

To view the hardware logs using CMC Web interface, in the system tree, go to Chassis Overview and click Logs → Hardware Log.

The Hardware Log page is displayed. To save a copy of the hardware log to your managed station or network, click Save Log and

then specify a location for a text file of the log.

NOTE: Since the log is saved as a text file, the graphical images used to indicate severity in the user interface do not

appear. In the text file, severity is indicated with the words OK, Informational, Unknown, Warning, and Severe. The date

and time entries appear in ascending order. If <SYSTEM BOOT> appears in the

Date/Time column, it means that the

event occurred during shut down or start up of any of the modules, when no date or time is available.

To clear the hardware log, click Clear Log.

NOTE: CMC creates a new log entry indicating that the log was cleared.

Viewing Hardware Logs Using RACADM

To view the hardware log using RACADM, open a serial/Telnet/SSH text console to CMC, log in, and type:

racadm getsel

To clear the hardware log, type:

racadm clrsel

Viewing CMC Log and Enhanced Chassis Log

CMC generates a log of the chassis-related events and enhanced logging of the chassis when the Enable Enhanced Logging and

Events option is enabled. To view enhanced logging of the chassis in the Chassis Log page, select the Enable Enhanced Logging

213