Users Guide

The Association Object allows as many or as few users and/or groups as well as RAC Device Objects. However, the Association
Object only includes one Privilege Object per Association Object. The Association Object connects the Users who have Privileges on
RACs (CMCs).
Additionally, you can configure Active Directory objects in a single domain or in multiple domains. For example, you have two CMCs
(RAC1 and RAC2) and three existing Active Directory users (user1, user2, and user3). You want to give user1 and user2 an
administrator privilege to both CMCs and give user3 a login privilege to the RAC2 card. The following figure illustrates how you set
up the Active Directory objects in this scenario.
When adding Universal Groups from separate domains, create an Association Object with Universal Scope. The Default Association
objects created by the Dell Schema Extender Utility are Domain Local Groups and does not work with Universal Groups from other
domains.
To configure the objects for the single domain scenario:
1. Create two Association Objects.
2. Create two RAC Device Objects, RAC1 and RAC2, to represent the two CMCs.
3. Create two Privilege Objects, Priv1 and Priv2, in which Priv1 has all privileges (administrator) and Priv2 has login privilege.
4. Group user1 and user2 into Group1.
5. Add Group1 as Members in Association Object 1 (A01), Priv1 as Privilege Objects in A01, and RAC1, RAC2 as RAC Devices in
A01.
6. Add User3 as Members in Association Object 2 (A02), Priv2 as Privilege Objects in A02, and RAC2 as RAC Devices in A02.
131