Users Guide

Privilege Description
Configure Users:
• Set iDRAC root password
• iDRAC reset
Server Control Administrator:
• Power on
• Power off
• Power cycle
• Graceful shutdown
• Server Reboot
Test Alert User User can send test alert messages.
Debug Command Administrator User can execute system diagnostic commands.
Fabric A Administrator User can set and configure the Fabric A IOM, which resides in either slot A1 or slot
A2 of the I/O slots.
Fabric B Administrator User can set and configure the Fabric B IOM, which resides in either slot B1 or slot
B2 of the I/O slots.
Fabric C Administrator User can set and configure the Fabric C IOM, which resides in either slot C1 or slot
C2 of the I/O slots.
The CMC user groups provide a series of user groups that have pre-assigned user privileges.
NOTE: If you select Administrator, Power User, or Guest User, and then add or remove a privilege from the pre-defined
set, the CMC Group automatically changes to Custom.
Table 20. : CMC Group Privileges
User Group Privileges Granted
Administrator
• CMC Login User
• Chassis Configuration Administrator
• User Configuration Administrator
• Clear Logs Administrator
• Server Administrator
• Test Alert User
• Debug Command Administrator
• Fabric A Administrator
• Fabric B Administrator
• Fabric C Administrator
Power User
• Login
• Clear Logs Administrator
• Chassis Control Administrator (Power commands)
• Server Administrator
• Test Alert User
• Fabric A Administrator
• Fabric B Administrator
• Fabric C Administrator
Guest User Login
123