Release Notes

Issue 3:
Description:
When the M1000e chassis is power cycled, the Dell PowerEdge PS-M4110 may not turn on and the
message, "iDRAC Not Ready", is displayed.
Resolution:
To turn on the server, reset CMC or virtually reseat the server.
Versions/Systems Affected
All CMC versions including CMC 5.20
Installation
Prerequisites
For information on pre-requisites, see the Dell PowerEdge M1000e Chassis Management Controller
Firmware Version 5.20 User's Guide
.
For information on Hardware and Software requirements, see the
Dell PowerEdge M1000e Chassis
Management Controller Firmware Version 5.20 User's Guide
.
For information on Installation and Configuration, see the
Dell PowerEdge M1000e Chassis Management
Controller Firmware Version 5.20 User's Guide
.
Installation Instructions
For information on installation, see the Dell PowerEdge M1000e Chassis Management Controller
Firmware Version 5.20 User's Guide
.
Upgrade
See the Prerequisites section for the correct version numbers.
Upgrading Dell PowerEdge M1000e I/O Aggregator
I/O Aggregator must first be updated to version 8.3.17.4 before updating to version 9.2.0.0 or greater.
Contacting Dell
NOTE:
If you do not have an active Internet connection, you can find contact information on your
purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by
country and product, and some services may not be available in your area.
To contact Dell for sales, technical support, or customer service issues:
1. Visit dell.com/support.
2. Select your support category.
3. Verify your country or region in the Choose a Country/Region drop-down menu at the top of page.