Release Notes

Versions/Systems Affected
All CMC versions including CMC 5.20 and PowerEdge servers with iDRAC7 or earlier.
Issue 2:
Description
An error occurs while importing CMC configuration file using local racadm or remote racadm.
Resolution
This issue occurs when IPv6 is enabled or disabled from the configuration file. Enable or disable IPv6
using the command, “racadm config -g cfgIPv6LanNetworking -o cfgIPv6Enable 0”.
Versions/Systems Affected
CMC version 5.11 or later
Issue 3:
Description
When CMC firmware is downgraded to 4.50 from 5.00 or later while network share is configured, the
Server Components Update page gets corrupted.
Resolution
Clear the network configuration before downgrading to 4.50
Versions/Systems Affected
CMC version 4.50 or earlier
Limitations
Issue 1:
Description
While executing WSMan commands continuously, some commands may timeout occasionally, but get
resolved quickly without CMC failover or reboot.
Resolution
None
Versions/Systems Affected
All CMC versions including CMC 5.20
Issue 2:
Description
In the Microsoft Edge browser, the Boot Identity Profiles page in the CMC GUI is slow when 1500 or
more MAC addresses are created from the MAC pool for the Boot Identity profile.
Resolution
Create less than 1500 MAC address in the Microsoft Edge browser. Use other supported browsers for
more than 1500 MAC addresses.
Versions/Systems Affected
CMC version 5.11 or later