Reference Guide

cfgRhostsSyslogPort (Read or Write)
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
This setting takes eect only if the cfgRhostsSyslogEnable parameter is set to 1(enabled).
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69, 123, 161, 546, 801,
4096, 5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 (Read or Write)
Description
To store the RAC and SEL logs specify the rst of three possible remote syslog servers. This property is only
valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogServer2 (Read or Write)
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog servers. This property is
only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogServer3 (Read or Write)
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers. This property is only
valid if cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogPowerLoggingEnabled (Read or Write)
Description
To remote syslog servers, Enables or disables power consumption logging.
NOTE: Remote syslog must be enabled and more than one remote syslog servers must be congured
to log the power consumption.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
0
93