Reference Guide

# idRacBuildInfo=200708301525

# idRacName=CMC-1

racadm getconfig -g idRacInfo

# idRacType=16

# idRacProductInfo=Integrated Dell Remote Access Controller

# idRacDescriptionInfo=This system component provides a complete set of remote management

functions for Dell PowerEdge Servers

# idRacVersionInfo=1.06.06

# idRacBuildInfo=15

# idRacName=idrac-GSRS3V1

cfgLanNetworking

This group contains parameters to congure CMC NIC for IPv4.

One instance of the group is allowed. Some objects in this group may require CMC NIC to be reset, which may cause a brief loss in

connectivity. Objects that change CMC NIC IP address settings close all active user sessions and require users to reconnect using

the updated IP address settings.

Use this object with the cong or getcong subcommands.

To use this object property, you must have the Chassis Conguration Administrator privilege.

NOTE: You can congure a setting that does not have a hash sign (#) prexed in the output. To modify a congurable

object, use the —o option.

The following sections provide information about the objects in the cfgLanNetworking group.

cfgNicIPv4Enable (Read or Write)

Description

Enables or disables IPv4 stack.

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default

cfgNicVLanEnable (Read or Write)

Description

Enables or disables the VLAN capabilities.

All chassis management trac, including the CMC and all iDRACs, resides on this external VLAN when enabled.

No iDRAC conguration change is required to use this external management network VLAN.

Legal Values

• 1 (TRUE)

• 0 (FALSE)

Default

Example

racadm config -g cfgLanNetworking -o cfgNicVLanEnable