Reference Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 5.20 for Dell PowerEdge M1000E

type=SSH, sid=35885)

Dec 4 22:26:20 CMC-JP4BF2S Login success from 192.168.0 (username=root,

type=GUI, sid=27476)

Dec 4 22:28:06 CMC-JP4BF2S Mod password of user puser succeeds

Dec 4 22:28:06 CMC-JP4BF2S Mod privileges of user puser succeeds

Dec 4 22:28:21 CMC-JP4BF2S Login success from 192.168.0 (username=puser,

type=SSH, sid=39229)

Dec 4 22:29:12 CMC-JP4BF2S Mod password of user nuser succeeds

Dec 4 22:29:12 CMC-JP4BF2S Mod privileges of user nuser succeeds

Dec 4 22:29:51 CMC-JP4BF2S SSH login failed (username=nuser,

ip=192.168.0, reason=Local user fails to login )

Dec 4 22:30:23 CMC-JP4BF2S last message repeated 3 times

Dec 4 22:30:23 CMC-JP4BF2S Mod privileges of user nuser succeeds

Dec 4 22:30:38 CMC-JP4BF2S SSH login failed (username=nuser,

ip=192.168.0, reason=Local user fails to login )

[more]

• Entry in the RAC log when Extended Power Performance control is enabled or disabled.

racadm getraclog

Jul 31 14:16:11 CMC-4C2WXF1 Log Cleared

Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Enabled

Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Disabled

• When Enhanced Logging mode is enabled, the output of getraclog is displayed similar to chassislog

output.

Using racadm config -g cfgRacTuning -o cfgRacTuneEnhancedLog 1 command,

Enhanced Logging feature is enabled.

SeqNumber = 38

Message ID = USR8501

Category = Audit

AgentID = CMC

Severity = Information

Timestamp = 2014-10-18 15:48:10

Message Arg 1 = 14503

Message Arg 2 = 48186

Message = Successfully closed Session process: pid=14503 sid=4818

getractime

Description

Displays the current CMC time.

Synopsis

• racadm getractime [-d]

• racadm getractime [-d] [-z]

• racadm getractime [-n]

Input

• -d — Displays the time in the format, YYYYMMDDhhmmss.

• -z — Displays timezone.

• -n — Displays NTP peer information.

NOTE: If the options are not provided, then the getractime subcommand displays the time in a

common readable format.

Output The current CMC time is displayed.

Example

• racadm getractime

Mon May 13 17:17:12 2013

• racadm getractime -d

20141126114423