Reference Guide

Switch-6 10 GbE KR Present
00:00:00:00:00:
00
N/A Factory
getmodinfo
Description Displays conguration and status information for all modules or a specied module (server, switch, CMC, fan
unit, power supply unit (PSU), KVM, or I2C cable) in the chassis.
A power state of "Primary" denotes Active CMC.
To run this subcommand, you must have the CMC Login User privilege.
NOTE: The Service tag eld is blank for modules that do not have service tag.
Synopsis
racadm getmodinfo [-m <module>] [-A]
Input
• -m <module> — Species the module whose conguration and status information you want to view. The
default command (no options) displays information about all major components in the chassis.
<module> may be any of the following values:
– server-<n> where n=1–16
– server-<nx> where n=1–8; x = a, b, c, d
– switch-<n> where n=1–6
– cmc-<n> where n=1–2
– fan-<n> where n=1–9
– ps-<n> where n=1–6
– chassis
– kvm
– io-cable
– fpc-cable
• -A — Suppresses headers or labels in the output.
Examples
Display status of all the modules in the chassis
racadm getmodinfo
Display status of fan module 3 in the chassis
racadm getmodinfo -m fan-3
• racadm getmodinfo -m switch-1
<module> <presence> <pwrState> <health> <svcTag> <nodeId>
Switch-1 Present ON OK 0000000 N/A
• racadm getmodinfo
<module> <presence> <pwrState> <health> <svcTag> <nodeId>
Chassis Present ON Not OK noble01 N/A
Fan-1 Present ON OK N/A N/A
Fan-2 Present ON OK N/A N/A
Fan-3 Present ON OK N/A N/A
47