Reference Guide

• Export the CMC XML conguration to an NFS share

racadm get -f file.xml -t xml -l 192.168.0.0:/myshare

getactiveerrors

Description Displays CMC active errors.

Synopsis

• racadm getactiveerrors

• racadm getactiveerrors [-s <severity>] [-m <module>]

Input The command racadm getactiveerrors displays the critical, warning, and informational messages for all

the modules.The values are:

-s <severity> — Species the severity type message displayed. The command racadm

getactiveerrors

displays the selected type of messages for all the modules. When used with -m option,

only selected message type for that module is displayed. The values for -s <severity> are:

• critical

• warning

• info

-m <module> — Species the module for which the messages such as critical, noncritical (warning), and

informational are displayed. The command racadm getactiveerrors displays critical, noncritical

(warning), and informational messages for the selected module. When used with -s option, only selected

message type for the module is displayed. The values for -m <module> are:

• server-<n> — where n=1–16

• server-<nx> — where n=1–8; x = a, b, c, d (lower case)

• switch-<n> — where n=1–6

• cmc-<n> — where n=1, 2

• fan-<n> — where n=1–9

• ps-<n> — where n=1–6

• chassis

• kvm

• lcd

NOTE: A few of the informational messages are applicable for more than one module. To avoid

repetition of the same message for dierent modules, only one such informational message is

displayed for the default command racadm getactiveerrors. When an -m option is used on

another server or switch, the informational message is displayed, if applicable.

After you run this command, the full-height, half-height, and the quarter-height servers and switches are

automatically checked for informational messages (in the same order as mentioned here).

Examples

• To display the entire log (Critical, Warning and Informational messages) for all modules.

racadm getactiveerrors

Module ID = 1

Severity = Critical

Message = The storage battery has failed.

Module ID = 10

Severity = Critical

Message = General failure after video.

Module ID = ps-6

Severity = Critical

Message = The power input for power supply 6 is lost.