Reference Guide

To run this subcommand, you must have the Administrator permission.
NOTE: This subcommand ends all the sessions other than the current session.
Synopsis
• racadm closessn –i <session_ID>
• racadm closessn -a
• racadm closessn -u <username>
Input
• —i <session_ID> — The session ID of the session to close, which can be retrieved using RACADM
getssninfo subcommand.
Session running this command cannot be closed.
• —a — Closes all sessions.
• —u <username> — Closes all sessions for a particular user name.
• For Remote RACADM, use either the —u option or the —i option.
Output
Successful or error message is displayed.
Example
• Closes the session 1234.
racadm closessn -i 1234
• Closes all the sessions other then the active session for root user.
racadm closessn –u root
• Closes all the sessions.
racadm closessn –a
clrraclog
Description
Deletes the CMC log.
Synopsis
racadm clrraclog
Input N/A
clrsel
Description
Removes all the existing records from the System Event Log (SEL).
To use this subcommand, you must have Clear Logs permission.
Synopsis
racadm clrsel [-m <module>]
Input -m <module> must be one of the following values:
• server-<n> — where n=1 to 16
• server-<nx> — where n=1 to 8; x = a, b, c, d (lower case)
Example
• racadm clrsel
The SEL was cleared successfully
• racadm clrsel -m server-1
Clear SEL log on server 1
18