Reference Guide

Default
None
cfgDNSCurrentServer1 (Read Only)
Description
Displays the IP address for DNS server 1.
Legal Values
A Valid IPv4 DNS IP
Default
0.0.0.0
cfgDNSCurrentServer2 (Read Only)
Description
Displays the IP address for DNS server 2.
Legal Values
A Valid IPv4 DNS IP
Default
0.0.0.0
cfgDNSCurrentDomainName (Read Only)
Description
Displays the DNS domain name.
Legal Values
<blank>
Default
None
cfgNicCurrentIPv4Enabled (Read or Write)
Description
Indicates whether IPv4 is enabled on the CMC. If the current property value is set to 0 (false), the remote
network interfaces to the CMC are not accessible over IPv4.
Legal Values
• 0 — Disabled
• 1 — Enabled
Default
1
Example
racadm getconfig -g cfgCurrentLanNetworking
# cfgNicCurrentIPv4Enabled=1
# cfgNicCurrentIpAddress=143.166.152.116
# cfgNicCurrentNetmask=255.255.255.0
# cfgNicCurrentGateway=143.166.152.1
# cfgNicCurrentDhcpWasUsed=0
# cfgNicCurrentVlanEnable=0
# cfgNicCurrentVlanID=1
# cfgNicCurrentVlanPriority=0
# cfgDNSCurrentServer1=192.168.0.5
# cfgDNSCurrentServer2=192.168.0.6
# cfgDNSCurrentDomainName=MYDOMAIN
cfgCurrentIPv6LanNetworking (Read Only)
This group displays the current CMC IPv6 properties.
137