Reference Guide

Output If no options are specified, a CSR is generated and downloaded to the local file system as sslcsr by
default. The -g option cannot be used with the -s option, and the -f option can only be used with the -g
option.
The sslcsrgen -s subcommand returns one of the following status codes:
● CSR was generated successfully.
● CSR does not exist.
Example
● Display current status of CSR operation:
racadm sslcsrgen -s
or
racadm sslcsrgen -g -f c:\csr\csrtest.txt
● Generate and download a CSR to local file system:
racadm -r 192.168.0.120 -u root -p calvin sslcsrgen -g -f csrtest.txt
NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM config —g
cfgracsecurity group. For example:
racadm config -g cfgracsecurity -o cfgRacSecCsrCommonName cmc-effort.cmc.com
NOTE: In Telnet or SSH console, you can only generate and not download the CSR file.
NOTE: The duration for generating a CSR key depends on the length specified for the key.
sslresetcfg
Description
Restores the web-server certificate to factory default and restarts web-server. The certificate takes effect
30 seconds after the command is entered.
To run this subcommand,you must have the Chassis Configuration Administrator privilege.
Synopsis
racadm sslresetcfg
Input N/A
Example
racadm sslresetcfg
Certificate generated successfully and webserver restarted.
testemail
Description
Sends a test email from CMC to a specified destination. Prior to running the test email command, make sure
that the SMTP server is configured.
The specified index in the cfgEmailAlert group must be enabled and configured properly. For more
information, see the Integrated Dell Remote Access Controller (iDRAC8) and iDRAC7 RACADM Command
Line Interface Reference Guide available at dell.com/support/manuals.
Synopsis
racadm testemail -i <index>
RACADM Subcommand Details 91