Reference Guide

<module> <LED state>
server-10 Blinking
● racadm getled -m chassis
<module> <LED state>
server-10 Not blinking
● racadm getled -m server-1
<module> <LED state>
server-1 ON
● racadm getled -m server-9
<module> <LED state>
server-9 Extension(1)
getmacaddress
Description
Displays the MAC/WWN addresses and fabric ID decoder for all modules or for a specified module.
The decoder values indicate the protocols of the netowrk cards:
● 0 — Unsupported
● 1 — ISCSI
● 2 — FCoE-FIP
● 3 — iSCSI/FCoE-FIP
To use this subcommand, you must have the CMC Login User privilege.
Synopsis
● racadm getmacaddress
●
racadm getmacaddress -m chassis
● racadm getmacaddress -m switch-<n>
●
racadm getmacaddress [-m <module> [-x]] [-t iscsi]
● racadm getmacaddress [-a]
●
racadm getmacaddress -c IO-Identity
●
racadm getmacaddress -c Flexaddress
●
racadm getmacaddress -c Factory
●
racadm getmacaddress -c all
Input
● -m <module> — Specifies the module whose MAC address you want to view.
<module> may be one of the following:
server-<n>, where n=1–16
server-<nx>, where n=1–8; x=a,b,c,d (lower case)
switch-<n>, where n=1–6
● -t — Displays the iSCSI MAC addresses for all servers or the specified server if used with -m option.
● -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACs and must
be used with -m option.
48 RACADM Subcommand Details