Reference Guide

Synopsis
racadm clrraclog
Input N/A
clrsel
Description
Removes all the existing records from the System Event Log (SEL).
To use this subcommand, you must have Clear Logs permission.
Synopsis
racadm clrsel [-m <module>]
Input -m <module> must be one of the following values:
● server-<n> — where n=1 to 16
● server-<nx> — where n=1 to 8; x = a, b, c, d (lower case)
Example
● racadm clrsel
The SEL was cleared successfully
● racadm clrsel -m server-1
Clear SEL log on server 1
cmcchangeover
Description
Changes the state of the CMC from active to standby, or from standby to active, in a redundant CMC
configuration. This subcommand is useful for remote debugging or testing purposes
To use this subcommand, you must have the Administrator privilege.
NOTE: This command is applicable only in redundant CMC environments. For more information, see the
"Understanding the Redundant CMC Environment" section of the Dell Chassis System User Guide.
Synopsis
racadm cmcchangeover
Input
N/A
Output
CMC failover initiated successfully.
Example
racadm cmcchangeover
config
Description
Allows you to set CMC configuration parameters individually or to batch them as part of a configuration file
and then modify CMC configuration properties. If the data is different, the CMC object is written with a
new value.
NOTE: This subcommand will be deprecated in the later versions. For information about configurations,
see the set subcommand.
20 RACADM Subcommand Details