Reference Guide

Default
1
Example
racadm getconfig -g cfgSerial
cfgSerialBaudRate=115200
cfgSerialConsoleEnable=1
cfgSerialConsoleQuitKey=^\
cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialTelnetEnable=0
cfgSerialSshEnable=1
cfgSerialTelnetEnable (Read or Write)
Description
Enables or disables the Telnet console interface.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of CMC. One instance of the group is
allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2 and the Dell enterprise-specific the MIB.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE:
You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable
object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Description
Specifies the SNMP Community Name used for SNMP traps. The community string acts as a password
shared between different hosts over the network. This community string value must match with the other
hosts for any kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
114
CMC Property Database Group and Object Descriptions