Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 5.10 for Dell PowerEdge M1000E
71727374757677787980
Viewing Health Status and Information for Individual
Server
To view health status for individual servers, do any of the following:
1. Go to Chassis Overview → Properties → Health.
The Chassis Health page displays a graphical overview of all the servers installed in the chassis.
Server health status is indicated by the overlay of the server subgraphic. Move the cursor to hover
over an individual server subgraphic. A corresponding text hint or screen tip provides additional
information for that server. Click the server subgraphic to view the IOM information on the right. For
more information, see the CMC Online Help.
2. Go to Chassis Overview and expand Server Overview in the system tree. All the servers (1–16)
appear in the expanded list. Click the server (slot) you want to view.
The Server Status page (separate from the Servers Status page) provides the health status of the
server in the chassis and a launch point to the iDRAC Web interface, which is the firmware used to
manage the server. For more information, see the CMC Online Help.
NOTE: To use the iDRAC Web interface, you must have an iDRAC user name and password. For
more information about iDRAC and the using the iDRAC Web interface, see the Integrated Dell
Remote Access Controller User’s Guide.
Viewing Storage Array Status
To view health status for storage servers, do any of the following:
1. Go to Chassis Overview → Properties → Health.
The Chassis Health page displays a graphical overview of all the servers installed in the chassis.
Server health status is indicated by the overlay of the server subgraphic. Move the cursor to hover
over an individual server subgraphic. A corresponding text hint or screen tip provides additional
information for that server. Click the server subgraphic to view the IOM information on the right. For
more information, see the CMC Online Help.
2. Go to Chassis Overview and expand Server Overview in the system tree. All the slots (1–16) appear
in the expanded list. Click the slot where the storage array is inserted.
The Storage Array Status page provides the health status and properties of the storage array. For
more information, see the CMC Online Help.
Viewing Information and Health Status of All IOMs
To view health status of the IOMs, in the CMC Web interface, do any of the following:
1. Go to Chassis Overview → Properties → Health.
The Chassis Health page is displayed. The lower section of Chassis Graphics depicts the rear view of
the chassis and contains the health status for the IOMs. IOM health status is indicated by the overlay
of the IOM subgraphic. Move the cursor to hover over the individual IOM subgraphic. The text hint
provides additional information on that IOM. Click the IOM subgraphic to view the IOM information
on the right.
2. Go to Chassis Overview → I/O Module Overview → Properties → Status.
79