Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 5.10 for Dell PowerEdge M1000E
71727374757677787980
Rolling Back Server Component Firmware
You can install the firmware image of the previously installed firmware for selected components or
devices across one or more servers. The firmware image is available within the Lifecycle Controller for a
rollback operation. The availability is subject to the version compatibility logic of the Lifecycle Controller.
It also assumes the previous update was facilitated by the Lifecycle Controller.
Rolling Back Server Component Firmware Using CMC Web Interface
To rollback the server component firmware version to an earlier version:
1. In the CMC Web interface, expand the system tree, go to Server Overview and then click Update →
Server Component Update.
The Server Component Update page is displayed, in the Choose Update Type section, select Update
from File.
2. Filter the component or device (optional).
3. In the Rollback Version column, select the check box for the component or device for which you
want to roll back the firmware.
4. Select one of the following options:
• Reboot Now - Reboot immediately.
• On Next Reboot - Manually reboot the server at a later time.
5. Click Rollback. The previously installed firmware version is re-installed for the selected component
or device.
Deleting Scheduled Server Component Firmware Jobs
You can delete jobs scheduled for the selected components and/or devices across one or more servers.
Deleting Scheduled Server Component Firmware Jobs Using Web Interface
To delete scheduled server component firmware jobs:
1. In the CMC Web interface, in the system tree, go to Server Overview and then click Update → Server
Component Update
.
The Server Component Update page is displayed.
2. In the Choose Update Type section, select Update from File. For more information, see Choosing
Server Component Update Type
NOTE: You cannot perform the job deletion operation for the Update from Network Share
mode of server component update.
3. In the Component/Device Update Filter section, filter the component or device (optional). For more
information see
Filtering Components for Firmware Updates Using CMC Web Interface.
4. In the Job Status column, a check box displayed next to the job status indicates that a Lifecycle
Controller job is in progress and currently is in the indicated state. You can select the job for a
deletion operation.
5. Click Job Deletion.
The jobs are deleted for the selected components or devices.
Recovering iDRAC Firmware Using CMC
iDRAC firmware is typically updated using iDRAC interfaces such as the iDRAC Web interface, the SM-CLP
command line interface, or operating system specific update packages downloaded from
support.dell.com. For more information, see the iDRAC User’s Guide.
73