Users Guide

Severity Message Cause
Non-
Recoverable
CPU machine check detected. The processor machine check entered a
non-recoverable state.
Critical Memory redundancy is lost.
Critical A bus fatal error was detected on a
component at bus <number> device
<number> function <number>.
Fatal error is detected on the PCIe bus.
Critical A software NMI was detected on a
component at bus <number> device
<number> function <number>.
Chip error is detected.
Critical Failed to program virtual MAC address
on a component at bus <number>
device <number> function <number>.
Flex address could be programmed for this
device.
Critical Device option ROM on mezzanine card
<number> failed to support Link Tuning
or FlexAddress.
Option ROM does not support Flex address
or linking tuning.
Critical Failed to get Link Tuning or FlexAddress
data from iDRAC.
NOTE: For information on other server related LCD messages, see "Server User Guide".
LCD Module and Server Status Information
The tables in this section describe status items that are displayed on the front panel LCD for each type of
component in the chassis.
Table 53. CMC Status
Item Description
Example: CMC1, CMC2 Name or Location.
No Errors If there are no errors then the message “No Errors”
is displayed, else error messages are listed. Critical
errors are listed first, followed by warnings.
Firmware Version Only displays on an active CMC. Displays Standby
for the standby CMC.
IP4 <enabled, disabled> Displays current IPv4 enabled state only on an
active CMC.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled only on an active
CMC.
IP6 <enabled, disabled> Displays current IPv6 enabled state only on an
active CMC.
IP6 Local Address: <address> Only displays if IPv6 is enabled only on an active
CMC.
281