Users Guide

Table 5. Latest Firmware Versions for BIOS, iDRAC, and Lifecycle Controller

Servers BIOS iDRAC Lifecycle Controller

PowerEdge M600 2.4.0 1.65 Not Applicable

PowerEdge M605 5.4.1 1.65 Not Applicable

PowerEdge M805 2.3.3 1.65 Not Applicable

PowerEdge M905 2.3.3 1.65 Not Applicable

PowerEdge M610 6.3.0 3.50 1.6

PowerEdge M610x 6.3.0 3.50 1.6

PowerEdge M710 6.3.0 3.50 1.6

PowerEdge M710HD 7.0.0 3.50 1.6

PowerEdge M910 2.9.0 3.50 1.6

Power Edge M915 3.0.4 3.50 1.6

PowerEdge M420 2.0.22 1.50.50 1.3.0

PowerEdge M520 2.0.22 1.50.50 1.3.0

PowerEdge M620 2.0.19 1.50.50 1.3.0

PowerEdge M820 2.0.21 1.50.50 1.3.0

PowerEdge M630 0.4.3 2.05.05.05 2.05.05.05

PowerEdge M830 1.2.0 2.20.20.20 2.20.20.20

NOTE: PowerEdge PSM4110 is supported by the Array Software version 6.0.4.

Supported Remote Access Connections

The following table lists the supported Remote Access Controllers.

Table 6. Supported Remote Access Connections

Connection Features

CMC Network Interface ports

• GB port: Dedicated network interface for the CMC Web interface.

Two 10/100/1000 Mbps ports; one for management and the other

for chassis to chassis cable consolidation.

• STK: Uplink port for chassis to chassis management network cable

consolidation.

• 10 Mbps/100 Mbps/1 Gbps Ethernet through CMC GbE port.

• DHCP support.

• SNMP traps and email event notification.

• Network interface for the iDRAC and I/O Modules (IOMs).

• Support for Telnet/SSH command console and RACADM CLI

commands including system boot, reset, power-on, and shutdown

commands.

Serial port

• Support for serial console and RACADM CLI commands including

system boot, reset, power-on, and shutdown commands.