Users Guide

6. Specify the name of the person receiving the email alert:
racadm config -g cfgEmailAlert -o cfgEmailAlertEmailName <email name> -i
<index>
where <email name> is the name of the person or group receiving the email alert, and <index> is
the index value specified in step 4 and step 5. The email name can contain up to 32 alphanumeric
characters, dashes, underscores, and periods. Spaces are not valid.
7. Setup the SMTP host:
racadm config -g cfgRemoteHosts -o cfgRhostsSmtpServerIpAddr host.domain
where host.domain is the FQDN.
You can configure up to four destination email addresses to receive email alerts. To add more email
addresses, repeat step 2 – step 6.
NOTE: The commands in steps 2–6 overwrite any existing settings configured for the index you
specify (1–4). To determine whether an index has previously configured values, type:xracadm
getconfig -g cfgEmailAlert — I
<index> . If the index is configured, values appear for
the cfgEmailAlertAddress and cfgEmailAlertEmailName objects.
For more information, see the Chassis Management Controller for Dell PowerEdge M1000e RACADM
Command Line Reference Guide available at dell.com/support/manuals.
144