Users Guide

Table 15. : QuickDeploy Settings
Setting Description
QuickDeploy Enabled Enables or disables the QuickDeploy feature that
automatically applies the iDRAC settings
configured on this page to newly inserted
servers. The auto configuration must be
confirmed locally on the LCD panel.
NOTE: This includes the root user password
if the Set iDRAC Root Password on Server
Insertion box is checked.
By default, this option is disabled.
Action When Server is Inserted Select one of the following options from the list:
• No Action — No action is performed when
the server is inserted.
• QuickDeploy Only— Select this option to
apply iDRAC network settings when a new
server is inserted in the chassis. The specified
auto-deployment settings are used to
configure the new iDRAC, which includes the
root user password if Change Root Password
is selected.
• Server Profile Only— Select this option to
apply server profile assigned when a new
server is inserted in the chassis.
• Quick Deploy and Server Profile — Select
this option to first apply the iDRAC network
settings, and then to apply the server profile
assigned when a new server is inserted in the
chassis.
Set iDRAC Root Password on Server Insertion Specifies whether a server’s iDRAC root
password must be changed to the value
provided in the iDRAC Root Password field
when the server is inserted.
iDRAC Root Password When Set iDRAC Root Password on Server
Insertion and QuickDeploy Enabled options are
selected, this password value is assigned to a
server's iDRAC root user password when the
server is inserted into chassis. The password can
have 1 to 20 printable (including spaces)
characters.
Confirm iDRAC Root Password Verifies the password entered into the iDRAC
Root Password field.
Enable iDRAC LAN Enables or disables the iDRAC LAN channel. By
default, this option is disabled.
Enable iDRAC IPv4 Enables or disables IPv4 on iDRAC. By default,
this option is enabled.
116