Users Guide

Importing Chassis Configuration Profiles
You can import chassis configuration profiles that are stored on a network share to the local
management station.
To import a stored profile on a remote file share to CMC, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Chassis Configuration Profiles → Stored
Profiles
section, click Import Profile.
The Import Profile section is displayed.
2. Click Browse to access the profile from the required location and then click Import Profile.
NOTE: You can import chassis configuration profiles using RACADM. For more information, see the
Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference
Guide.
Applying Chassis Configuration Profiles
You can apply chassis configuration to the chassis if the chassis configuration profiles are available as
stored profiles on the network share. To initiate a chassis configuration operation, you can apply a stored
profile to a chassis.
To apply a profile to a chassis, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Stored Profiles section, select the stored
profile that you want to apply.
2. Click Apply Profile.
A warning message is displayed that applying a new profile overwrites the current settings and also
reboots the selected chassis. You are prompted to confirm if you want to continue the operation.
3. Click OK to apply the profile to the chassis.
Exporting Chassis Configuration Profiles
You can export chassis configuration profiles that are saved on the network share to a specified path on a
management station.
To export a stored profile, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Chassis Configuration Profiles → Stored
Profiles section, select the required profile and then click Export Copy of Profile.
A File Download message is displayed prompting you to open or save the file.
2. Click Save or Open to export the profile to the required location.
Editing Chassis Configuration Profiles
You can edit chassis configuration profile name of a chassis.
To edit a chassis configuration profile name, perform the following tasks:
1. Go to the Chassis Configuration Profiles page. In the Chassis Configuration Profiles → Stored
Profiles section, select the required profile and then click Edit Profile.
The Edit Profile window is displayed.
2. Enter a desired profile name in the Profile Name field and click Edit Profile.
Operation Successful message is displayed.
104