Reference Guide

– domain\user

– user@domain

• -p — Password

Example

• Deploy a remote image on iDRAC CIFS share for all the servers.

racadm remoteimage -c -a -l '//192.168.0/dev/floppy.img' -u

admin -p xxx

• Deploy a remote image on iDRAC NFS share for all the servers.

racadm remoteimage -c -a -l '192.168.0:/dev/floppy.img' -u

admin -p xxx

set

Description

Import saved CMC configuration or CMC Event Filter configuration from a file.

NOTE: If CMC is not in the network, you cannot import the chassis

configuration profile from a remote network share with proxy using the

set command. But, you can import the chassis configuration profile from

the local management station.

Synopsis

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -

f <filename>

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -

f <filename> -t xml

racadm set -f <filename> -t xml -l <NFS share>

racadm set -f <filename> -t xml -l <CIFS share> -u

Input

• -f: import CMC configuration or CMC event filter from a file.

• -u: username of the remote share from where the file must be imported.

• -p: password for the remote share from where the file must be imported.

• -l: network share location from where the file must be imported.

• -t: specify the file type to be imported. The valid value is xml. This option is

case-insensitive.

Example

• Configure event filter configurations from a configuration file using remote

racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -

f file.txt

• Configure a CMC from an XML configuration file on a local share using

remote racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -

f myfile.xml -t xml

• Configure a CMC from an XML configuration file on a remote CIFS share

racadm set -f myfile.xml -t xml -u myuser -p mypass -l //

192.168.0.0/myshare

• Configure a CMC from an XML configuration file on a remote NFS share

racadm set -f myfile.xml -t xml -l 192.168.0.0:/myshare