Reference Guide

<uc>

Temp 1 Ambient_Temp OK 21 celcius N/A 40

PWR 1 PS-1 Online OK

PWR 2 PS-2 Online OK

PWR 3 PS-3 Online OK

PWR 4 PS-4 Slot Empty N/A

PWR 5 PS-5 Failed OK

PWR 6 PS-6 Slot Empty N/A

racreset

Description

Resets CMC. The reset event is logged in the hardware (SEL) and CMC (RAC) logs.

To run this subcommand, you must have the Chassis Administrator privilege.

NOTE: After you run the racreset subcommand, CMC may require up to two

minutes to return to a usable state.

NOTE: There is a 100 percent fan request when the command is run against the

servers.

Synopsis

racadm racreset [-m <module> [-f]]

Input

• -m — The values must be one of the following:

– server–<n> — where n=1–16

– server–<nx> — where n=1–8; x = a, b, c, d (lower case)

NOTE:

– Multiple modules may be specified, such as -m <module1> -m <module

2>.

– -f option is used to force the reset and is available only with an -m option.

Output

racadm racreset

RAC reset operation initiated successfully. It may take up to a

minute for the RAC to come online again.

Example

• To reset CMC.

racadm racreset

• To reset server 1

racadm racreset -m server-1

• To reset servers 1 and 3

racadm racreset -m server-1 -m server-3

racresetcfg

Description

Deletes your current CMC configuration and resets CMC to the factory default settings.

After reset, the default name and password are root and calvin, respectively, and the IP

address is 192.168.0.120.