Reference Guide

Switch-5 Present ON OK N/A N/A

Switch-6 Not Present N/A N/A N/A N/A

Server-1 Present ON OK ABC1234 ABC1234

Server-2 Present ON OK ABC1234 ABC1234

Server-3 Present ON OK BCD1234 BCD1234

Server-4 Present ON OK BCD1234 BCD1234

Server-5 Present ON OK BCD1234 BCD1234

Server-6 Present ON OK BCD1234 BCD1234

Server-7 Present ON OK BCD1234 BCD1234

Server-8 Present ON OK BCD1234 BCD1234

Server-9 Present ON OK BCD1234 BCD1234

Server-10 Present ON OK ABC1234 ABC1234

Server-11 Present ON OK ABC1234 ABC1234

Server-12 Present ON OK BCD1234 BCD1234

Server-13 Present ON OK BCD1234 BCD1234

Server-14 Present ON OK ABC1234 ABC1234

Server-15 Present ON OK BCD1234 BCD1234

Server-16 Present ON OK BCD1234 BCD1234

KVM Present ON OK N/A N/A

IO-Cable Present ON OK noble01 N/A

FPC-Cable Present ON OK noble01 N/A

NOTE: A power state of "Primary" denotes Active CMC.

getniccfg

Description

Displays the current NIC settings.

Synopsis

racadm getniccfg [-m <module>]

Input

–m <module> must be one of the following values:

• chassis : Default state if -m is not specified.

• server-<n> : where n=1–16

• server-<nx> : where n=1–8; x = a, b, c, d (lower case)

• switch-<n> : where n=1–6

Output

The getniccfg subcommand displays an appropriate error message if the operation is

not successful. Otherwise, the output is displayed in the following format:

NIC Enabled =1

IPv4 Enabled =1