Reference Guide

server-<nx>, where n=1–8; x=a,b,c,d (lower case)

switch-<n>, where n=1–6

• -t — Displays the iSCSI MAC addresses for all servers or the specified server if used

with -m option.

• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM

MACs and must be used with -m option.

• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC or LOMs

or mezzanine cards. When FlexAddress is enabled for a particular slot, then the

chassis-assigned MAC/WWN address is displayed.

• -c — Displays the ethernet and iSCSI MAC/WWN and assignment type, partition

status of all LOMs or mezzanine cards. The -c option must be one of the following

values:

– IO-Identity — Displays the user-defined MAC/WWN addresses.

– FlexAddress — Displays the chassis-assigned MAC/WWN addresses.

– Factory — Displays factory MAC/WWN addresses.

– all — Displays Ethernet and iSCSI MAC/WWN address, Assignment Type, and

Partition Status of all LOMs or mezzanine cards.

Example

• Display MACs for all modules.

racadm getmacaddress

• Display iSCSI MAC addresses for all servers.

racadm getmacaddress -t iscsi

• Display iSCSI MAC for server-1.

racadm getmacaddress -m server-1 -t iscsi

• Display extra iSCSI MACs for server-1 (if available).

racadm getmacaddress -m server-1 -t iscsi -x

• Display the user-defined MAC and WWN address.

– racadm getmacaddress -c io-identity

– racadm getmacaddress -c io-identity -m server -x

• Displays the console assigned MAC/WWN of all LOMs or mezzanine cards.

racadm getmacaddress -c all

• Displays the chassis-assigned WWN/MAC address.

racadm getmacaddress -c flexaddress

• Displays the MAC/WWN addresses for all LOMs or mezzanine cards.

racadm getmacaddress -c factory

Displays the MAC address for chassis.

racadm getmacaddress -m chassis

<Name> <Presence> <BMC MAC

Address>

<NIC1 MAC

Address>

<NIC2 MAC

Address>

CMC Present N/A

F0:4D:A2:77:71:

N/A

racadm getmacaddress -m switch-1