Reference Guide

• cmc-active

Output

• LED is blinking

• LED is not-blinking

Example

• racadm getled -m server-10

server-10 Blinking

• racadm getled -m chassis

server-10 Not blinking

• racadm getled -m server-1

server-1 ON

• racadm getled -m server-9

server-9 Extension(1)

getmacaddress

Description Displays the MAC/WWN addresses and fabric ID decoder for all modules or for a

specified module.

The decoder values indicate the protocols of the netowrk cards:

• 0 — Unsupported

• 1 — ISCSI

• 2 — FCoE-FIP

• 3 — iSCSI/FCoE-FIP

To use this subcommand, you must have the CMC Login User privilege.

Synopsis

• racadm getmacaddress

• racadm getmacaddress -m chassis

• racadm getmacaddress -m switch-<n>

• racadm getmacaddress [-m <module> [-x]] [-t iscsi]

• racadm getmacaddress [-a]

• racadm getmacaddress -c IO-Identity

• racadm getmacaddress -c Flexaddress

• racadm getmacaddress -c Factory

• racadm getmacaddress -c all

Input

• -m <module> — Specifies the module whose MAC address you want to view.

<module> may be one of the following:

server-<n>, where n=1–16