Reference Guide

NOTE: If FlexAddress is not activated on the chassis, the command displays server-

assigned MAC/WWN addresses. If the slot is empty, the command enters blank in

the server-assigned MAC/WWN addresses. If an external console controls the

MAC/WWN addresses, the command displays an externally managed message.

Synopsis

racadm getflexaddr [-i <slotNum>]

Input -i <slotNum> — Specifies the slot information that must be displayed. <slotNum>

can be from 1 to 16.

Output None

Example

Display current flexaddress settings for all slots and fabrics.

racadm getflexaddr

<Slot#> <Status> <Server Presence>

1 Enabled Present

2 Enabled Present

3 Enabled Not Present

4 Enabled Not Present

5 Enabled Present

6 Enabled Not Present

7 Enabled Not Present

8 Enabled Not Present

9 Enabled Not Present

10 Enabled Extension(2)

11 Enabled Not Present

12 Enabled Not Present

13 Enabled Extension(5)

14 Enabled Not Present

15 Enabled Not Present

16 Enabled Not Present

A Gigabit Ethernet Enabled

B None Enabled