Reference Guide

NOTE: If CMC is not in the network, you cannot export the chassis

configuration profile to a remote network share with proxy using the get

command. But, you can export the chassis configuration profile to the

local management station.

Synopsis

racadm get -f <filename>

racadm -r <CMC IP> -u <username> -p <password> get -f

racadm -r <CMC IP> -u <username> -p <password> get -f

<filename> -t xml

racadm get -f <filename> -t xml -u <username> -p

racadm get -f <filename> -t xml -l <NFS share>

Input

• –f: save event filter configurations to a file.

• -u: username of the remote share where the file must be exported.

• -p: password for the remote share where the file must be exported.

• -l: network share location where the file must be exported.

• -t: specify the file type to be exported. Valid value is xml. This option is

case-insensitive.

• --clone: export the cloned configuration file. Only the XML file format is

supported. The configuration file can be exported to a local or remote

share.

NOTE: Clone configuration file is default if --clone or --replace is not

specified.;

• --replace: export the replaced configuration file. Only XML file format is

supported. The configuration file can be exported to a local or remote

share.

• --includeph: include password hash attributes

Example

• Export the CMC XML configuration to a local share using remote racadm

racadm -r 192.168.0.120 -u abc -p <password> get -f

file.xml -t xml

• Export the CMC XML configuration to a CIFS share

racadm get -f file.xml -t xml -u myuser -p mypass -l //

192.168.0.0/share

• Export the CMC XML configuration to an NFS share

racadm get -f file.xml -t xml -l 192.168.0.0:/myshare

getactiveerrors

Description Displays CMC active errors.

Synopsis

• racadm getactiveerrors

• racadm getactiveerrors [-s <severity>] [-m <module>]

Input The command racadm getactiveerrors displays the critical, warning, and

informational messages for all the modules.The values are: