Reference Guide

• Read the status of the firmware update.

racadm fwupdate -s

• Cancel a firmware update in progress.

racadm fwupdate –c

NOTE: Firmware update from local RACADM (using -p -u -d options) is not

supported on linux OS.

NOTE: These commands specifically apply to an active-CMC update.

Signed CMC Firmware Image:

• To get the firmware update status:

racadm fwupdate –s –m cmc-active

Invalid firmware: The uploaded firmware image does not contain a verification

signature.

The following table describes the firmware update method supported for each interface.

FW Update Method CMC

Local RACADM No

Local RACADM-TFTP No

Local RACADM-FTP No

Remote RACADM Yes

Remote RACADM-TFTP Yes

Remote RACADM-FTP Yes

Firmware RACADM-TFTP Yes

Firmware RACADM-FTP Yes

get

Description

Saves CMC configuration properties to a file.