Reference Guide

— <featurename> — must be one of the following:

• flexAddress

• flexAddressPlus

• ExtendedStorage (with -d, or -r)

NOTE: The —a option is not supported for CMC 5.0.

Example

• Display the current status of all chassis features:

racadm feature -s

• Deactivate the FlexAddressPlus feature on the chassis:

racadm feature -d -c FlexAddressPlus

featurecard

Description Verifies proper SD card installation and displays the SD card status.

To use this subcommand, you must have the Chassis Configuration Administrator

privilege.

Synopsis

racadm featurecard -s

Input

-s — Lists active SD card features and SD card status.

Output

• No feature card inserted — Action: To verify that the SD card was properly

inserted, check the CMC. In a redundant CMC configuration, make sure the CMC

with the SD feature card installed is the active CMC and not the standby CMC.

• The feature card inserted is valid and contains the following

feature(s) FlexAddress: The feature card is bound to this

chassis

— Action: No action required.

• No features active on the chassis — Action: Install the SD card into the

CMC.

• The feature card inserted is valid and contains the following

feature(s) FlexAddress: The feature card is bound to another

chassis, svctag = ABC1234, SD card SN = 01122334455

Action: Remove the SD card; locate and install the SD card for the current chassis.

• The feature card inserted is valid and contains the following

feature(s) FlexAddress: The feature card is not bound to any

chassis

Action: The feature card can be moved to another chassis, or can be reactivated on

the current chassis. To reactivate on the current chassis, enter racadm racreset

until the CMC module with the feature card installed becomes active.

Example

$ racadm featurecard -s

The feature card inserted is valid, serial number

TEST0123456789012345678

The feature card contains the following feature(s):

FlexAddress: The feature is bound to this chassis

FlexAddressPlus: The feature is bound to this chassis

ExtendedStorage: The feature is bound to this chassis