Reference Guide

cfgRacTuneIpBlkFailWindow (Read or Write)
Description
Defines the time span in seconds that the unsuccessful attempts are counted. When
unsuccessful attempts age beyond this limit, they are dropped from the count.
Legal Values
2–655356
Default
60
cfgRacTuneIpBlkPenaltyTime (Read or Write)
Description
Defines the time span in seconds that session requests from an IP address with
excessive failures are rejected.
Legal Values
2–655356
Default
300
cfgRacTuneDefCredentialWarningEnable (Read or Write)
Description
Displays warning during login if the default credentials warning property is set.
NOTE: Warning is displayed only with configure the user privilege.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
1 — Enabled
cfgRacTuneUserBlkEnable (Read or Write)
Description
Blocks the login for maximum of 5 minutes after 5 unsuccessful login attempts. The
login using any interface such as WSMAN or GUI is blocked after 5 unsuccessful
attempts
NOTE: This is applicable only to configure the user privilege.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
0 — Disabled
cfgRacTuneSshPort (Read or Write)
Description
Specifies the port number used for the SSH interface.
118