Reference Guide

Default
1
cfgRacTuneIdracDNSLaunchEnable (Read or Write)
Description
Configure iDRAC or CMC GUI launch using IP or DNS.
Legal Values
• 1 — Enabled (launch iDRAC or CMC using DNS name)
• 0 — Disabled (launch iDRAC or CMC using IP address)
Default
0 — Disabled
cfgRacTuneEnhancedLog (Read or Write)
Description
Enables or disables the enhanced chassis log feature.
Legal Values
• 1 — Enable
• 0 — Disable
Default 0
cfgRacTuneHttpPort (Read or Write)
Description
To use HTTP network communication, specify the port number.
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69,
111, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, and 60106.
Default
80
cfgRacTuneHttpsPort (Read or Write)
Description
To use HTTPS network communication, specify the port number.
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69,
111, 123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, and 60106.
Default
443
cfgRacTuneIpRangeEnable (Read or Write)
Description
Enables or disables the IPv4 Address Range validation feature.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
116