Reference Guide

is canceled if the time limit exceeds this property. Changes to this setting do not affect
the current session; log out and log in again to make the new settings effective.
After the message is displayed, the system returns to the shell that generated the Secure
Shell session.
Legal Values
• 0 —(No timeout)
• 60–10800
NOTE: If 0 (no timeout), the network connection does not send alive packets to
probe the client. Otherwise, keep alive packets are sent to guarantee that the client
is responding.
Default
1800
cfgSsnMgtTelnetIdleTimeout (Read or Write)
Description
Defines the Telnet idle timeout. This property sets the amount of time in seconds that a
connection is allowed to remain idle (there is no user input). The session is canceled if
the time limit exceeds this property. Changes to this setting do not affect the current
session (you must log out and log in again to make the new settings effective.)
After the message is displayed, the system returns you to the shell that generated the
Telnet session.
Default
1800
cfgSerial
This group contains configuration parameters for the serial configuration. One instance of the group is
allowed.
Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgSerial group.
cfgSerialBaudRate (Read or Write)
Description
Sets the baud rate on the serial port.
Legal Values
2400, 4800, 9600, 19200, 28800, 38400, 57600, 115200
Default
115200
110