Reference Guide

cfgRhostsSyslogServer1=
cfgRhostsSyslogServer2=
cfgRhostsSyslogServer3=cfgRhostsSyslogPowerLoggingEnabled=1
cfgRhostsSyslogPowerLoggingInterval=5
cfgUserAdmin
This group provides configuration information about the users allowed to access CMC through the
available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the configuration for an
individual user.
NOTE: In the current CMC firmware version, the objects cfgUserAdminEnable and
cfgUserAdminPrivilege are interrelated; changing the value of one property causes the value of the
other property to change. For example, if a user does not have login privilege, the user is disabled by
default. When you enable the user by changing the value of the UserAdminEnable to 1, the right-
most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you change the right-
most digit of the UserAdminPrivilege to 0, the value of the UserAdminEnable becomes 0.
Use this object with the config or getconfig subcommands. To use the command as follows: -i <index
group>, supply an index group number
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To
modify a configurable object, use the
—o option.
The following sections provide information about the objects in the cfgUserAdmin group.
cfgUserAdminIndex (Read Only)
Description The unique index of a user.
The index number is used to specify a unique group name. Only valid for indexed
groups.
Legal Values
The parameter specifies decimal integer 1–16.
Default
<index of the instance>
cfgUserAdminPrivilege (Read or Write)
Description
This property specifies the role-based authority privileges allowed for the user. The
value is represented as a bit mask that allows for any combination of privilege values.
The table below describes the user privilege bit values that can be combined to create
bit masks.
Legal Values
0x0000000-0x0000fff, and 0x0
Default
0x00000000
104