Reference Guide

cfgRhostsSyslogServer2 (Read or Write)
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog
servers. This property is only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogServer3 (Read or Write)
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers.
This property is only valid if cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
cfgRhostsSyslogPowerLoggingEnabled (Read or Write)
Description To remote syslog servers, Enables or disables power consumption logging.
NOTE: Remote syslog must be enabled and more than one remote syslog servers
must be configured to log the power consumption.
Legal Values
• 1 — Enabled
• 0 — Disabled
Default
0
cfgRhostsSyslogPowerLoggingInterval (Read or Write)
Description Specifies the power consumption collection/logging interval.
Legal Values
1–1440 (minutes)
Default
5
Example
racadm getconfig -g cfgRemoteHosts [-m server-<n>]
cfgRhostsFwUpdateTftpEnable=1
cfgRhostsFwUpdateIpAddr=0.0.0.0
cfgRhostsFwUpdatePath=
cfgRhostsSmtpServerIpAddr=localhost.localdomain
cfgRhostsNtpEnable=0
cfgRhostsNtpServer1=
cfgRhostsNtpServer2=
cfgRhostsNtpServer3=
cfgRhostsNtpMaxDist=16
cfgRhostsSyslogEnable=0
cfgRhostsSyslogPort=514
103