Reference Guide

Default
Null
cfgRhostsNtpMaxDist (Read or Write)
Description
Specifies the NTP maximum distance parameter used to aid in NTP configuration.
Legal
Values
1–128
Default
16
cfgRhostsSyslogEnable (Read or Write)
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers
Enables or disables remote syslog.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Description Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog
server.
This setting takes effect only if the cfgRhostsSyslogEnable parameter is set to
1(enabled).
Legal Values
10–65535
NOTE: The following port numbers are reserved and cannot be used: 21, 68, 69,
123, 161, 546, 801, 4096, 5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogServer1 (Read or Write)
Description
To store the RAC and SEL logs specify the first of three possible remote syslog servers.
This property is only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid host name or IPv4 or IPv6 address.
Default
<blank>
102