Users Guide

Configuring Services Using CMC Web Interface

To configure CMC services using CMC Web interface:

1. In the system tree, go to Chassis Overview, and then click Network → Services. The Services page is

displayed.

2. Configure the following services as required:

• CMC serial console

• Web server

• SSH

• Telnet

• Remote RACADM

• SNMP

• Remote Syslog

For information about the fields, see CMC Online Help.

3. Click Apply, and then update all default time outs and maximum time out limits.

Configuring Services Using RACADM

To enable and configure the various services, use the following RACADM objects:

• cfgRacTuning

• cfgRacTuneRemoteRacadmEnable

For more information about these objects, see Chassis Management Controller for Dell PowerEdge

M1000e RACADM Command Line Reference Guide available at dell.com/support/manuals.

If the firmware on the server does not support a feature, configuring a property related to that feature

displays an error. For example, using RACADM to enable remote syslog on an unsupported iDRAC

displays an error message.

Similarly, when displaying the iDRAC properties using the RACADM getconfig command, the property

values are displayed as N/A for an unsupported feature on the server.

For example:

$ racadm getconfig -g cfgSessionManagement -m server-1

# cfgSsnMgtWebServerMaxSessions=N/A

# cfgSsnMgtWebServerActiveSessions=N/A

# cfgSsnMgtWebServerTimeout=N/A

# cfgSsnMgtSSHMaxSessions=N/A

# cfgSsnMgtSSHActiveSessions=N/A

# cfgSsnMgtSSHTimeout=N/A

# cfgSsnMgtTelnetMaxSessions=N/A

# cfgSsnMgtTelnetActiveSessions=N/A

# cfgSsnMgtTelnetTimeout=N/A

Configuring CMC Extended Storage Card

You can enable or repair the optional Removable Flash Media for use as an extended non-volatile

storage. Some CMC features depend on extended nonvolatile storage for their operation.