Users Guide

3. In the Rollback Version column, select the check box for the component or device for which you

want to roll back the firmware.

4. Select one of the following options:

• Reboot Now - Reboot immediately.

• On Next Reboot - Manually reboot the server at a later time.

5. Click Rollback. The previously installed firmware version is re-installed for the selected component

or device.

Deleting Scheduled Server Component Firmware Jobs

You can delete jobs scheduled for the selected components and/or devices across one or more servers.

Deleting Scheduled Server Component Firmware Jobs Using Web Interface

To delete scheduled server component firmware jobs:

1. In the CMC Web interface, in the system tree, go to Server Overview and then click Update → Server

Component Update.

The Server Component Update page is displayed.

2. In the Choose Update Type section, select Update from File. For more information, see Choosing

Server Component Update Type

NOTE: You cannot perform the job deletion operation for the Update from Network Share

mode of server component update.

3. In the Component/Device Update Filter section, filter the component or device (optional). For more

information see

Filtering Components for Firmware Updates Using CMC Web Interface.

4. In the Job Status column, a check box displayed next to the job status indicates that a Lifecycle

Controller job is in progress and currently is in the indicated state. You can select the job for a

deletion operation.

5. Click Job Deletion.

The jobs are deleted for the selected components or devices.

Recovering iDRAC Firmware Using CMC

iDRAC firmware is typically updated using iDRAC interfaces such as the iDRAC Web interface, the SM-CLP

command line interface, or operating system specific update packages downloaded from

support.dell.com. For more information, see the iDRAC User’s Guide.

Early generations of servers can have corrupted firmware recovered using the new update iDRAC

firmware process. When CMC detects corrupted iDRAC firmware, it lists the server on the Firmware

Update page. Perform the steps as mentioned for updating firmware.