Users Guide

Field Description

chassis), that help to identify the location of the server in the chassis.

When there are less than 16 servers occupying slots, only those slots

populated by servers are displayed.

Name Displays the name of the server in each slot.

Model Displays the model of the server.

Component/Device Displays a description of the component or device on the server. If

the column width is too narrow the mouse-over tool provides a view

of the description.

Current Version Displays the current version of component or device on the server.

Rollback Version Displays the rollback version of component or device on the server.

Job Status Displays the job status of any operations that are scheduled on the

server. The job status is continuously updated dynamically. If a job

completion with state completed is detected, then the firmware

versions for the components and devices on that server are

automatically refreshed in case there has been a change of firmware

version on any of the components or devices. An information icon is

also presented adjacent to the current state, which provides

additional information of the current job status. This information can

be viewed by clicking or hovering over the icon.

Update Selects the component or device for firmware update on the server.

Viewing Firmware Inventory Using RACADM

To view Firmware Inventory using RACADM, use the getversion command:

racadm getversion -l [-m <module>] [-f <filter>]

For more information, see the Chassis Management Controller for Dell PowerEdge M1000e RACADM

Command Line Reference Guide available at dell.com/support/manuals.

Saving Chassis Inventory Report Using CMC Web Interface

To save the chassis inventory report:

1. In the system tree, go to Server Overview, and then click Update → Server Component Update.

The Server Component Update page is displayed.

2. Click Save Inventory.

The Inventory.xml file is saved on an external system.

NOTE: The Dell Repository Manager Application uses the Inventory.xml file as an input to create

a repository. You must have CSIOR enabled on the individual servers and save the chassis

inventory report every time there is a change to the chassis hardware and software

configuration.