Users Guide

NOTE: You can set this table through the
CMC CLI or Web interface.
Name Name of the server, which the user can set
through Dell OpenManage. The name is displayed
only if iDRAC has finished booting, and the server
supports this feature, else iDRAC booting
messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages
string.
iDRAC Firmware Version Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1.
There is no iDRAC version 1.10.
IP4 <enabled, disabled> Displays the current IPv4 enabled state.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled.
IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays
current IPv6-enabled state.
IP6 Local Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is
enabled.
IP6 Global Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is
enabled.
FlexAddress enabled on Fabrics Only displays if the feature is installed. Lists the
fabrics enabled for this server (that is, A, B, C).
The information in the table is dynamically updated. If the server does not support this feature, then the
following information does not appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Effect.
• Option “Custom” = Allows you to enter a string name for the server.
The information is displayed only if iDRAC has completed booting. For more information on this feature,
see the Chassis Management Controller for Dell PowerEdge M1000e RACADM Command Line Reference
Guide at dell.com/support/manuals.
270